IP Discovery/Quick ONVIF/IPC test /RTSP play /Client APK. Auto view the video, create testing report. Pressing just one key to activate hikvision camera , Image test, can modify the user name, password and IP parameters. Dahua camera test, modify the user name, password and IP parameters.
IP & Analog CVBS test. IP& CVBS test at the same time, converter test from analog to digital with dual test window. 8MP TVI camera test, 3840 x 2160P 15FPS, UTC control/call OSD menu. 8MP CVI camera test, 3840 x 2160P 12.5F/15F, UTC control/call OSD menu.
8MP AHD camera test, 2560x1944P 15FPS, UTC control/call OSD menu. 8MP EX-SDI, HD-SDI, 3G-SDI camera test, UTC control & call OSD menu.4x zoom, to enlarge image, Screen snapshot, record , save , view and record and play back. Output one channel PAL/NTSC color bar video signal for testing monitor or video cable. 1 channel HDMI output, support 19201080P. Output DC12V/3A power out , supply temporarily power for the camera.
Output DC24V/2A power out , supply temporarily power for PTZ speed dome camera. 48V PoE power output, max power 25.5W.
USB 5V 2A power output, as a power bank. BNC cable, network cable, telephone cable, RVV cable and elevator cable, cat 5/6 cables length and short circuit. Search BNC cable, network cable and telephone cable from the mess cables.
Test UTP cable connection status and display on the screen. Read the number on the screen. Test cable pair status, length, attenuation, reflectivity, impedance, skew etc, measurement range 180M. Trace route, Link monitor, DHCP server, port flashing, Ping test. Built in WIFI, speeds150M, display wireless camera image.
1 channel audio signal input, test whether sound normal, 1 channel audio signal, to connect headphone. Captures and analyzes the command data from controlling device, also can send hexadecimal.
Measurement POE switch or PSE power supply voltage and cable connection status. You can select PoE power switch , IP setting, WLAN switch , HDMI IN functions etc in any interface. Built-in 7.6V Lithium polymer battery. Urs, normal working time 15 hours.OSD menu, select your desired language: English, Chinese, Korean, Russian, Italian, French, Polish, Spanish, Japanese etc. 240mm x 154mm x 51mm / 620g. Below are optional functions (If add any functions into tester, you need pay addition cost), full model is IPC-9800CLMOVTADHS plus. Digital Multimeter: DC and AC voltage measurement, Resistance measurement, Continuity test, Diode measurements, Capacitance measurement. Optical power meter, Wavelength1625,1550nm, 1490nm, 1310nm, 1300nm, 850nm, measurement range , -70 +10 dBm, for optical power testing and Fiber link loss relative measurement. Visual fault locator: 10mW visual fault locator with 650nm wavelength can emit red laser sources to test multi-mode and single mode fibers bending and breakage, test range 10KM.
TDR cable test: BNC cable, network cable, telephone cable, RVV cable and elevator cable, cat 5/6 cables length and short circuit. 8MP AHD test, 3840 x 2160P 15FPS , UTC control/ call OSD menu. 8MP TVI camera test, 3840 x 2160P 15FPS, UTC control/ call OSD menu.8MP CVI camera test, 3840 x 2160P 12.5F/15F, UTC controld call OSD menu. 8MP EX-SDI, HD-SDI, 3G-SDI, UTC control & call OSD menu.
Video level meter, PEAK , SYNC signal level, color burst chroma level measurement. Cable tracer , search BNC cable, network cable and telephone cable from the mess cable. The item "4K 7 IP Analog TVI CVI SDI AHD HDMI CCTV Tester Monitor IPC-9800ADHS Plus" is in sale since Thursday, September 13, 2018. This item is in the category "Consumer Electronics\Surveillance & Smart Home Electronics\Home Surveillance\Home Surveillance Parts & Accessories\Surveillance Monitors & Displays". The seller is "harmonious20" and is located in Shenzhen.This item can be shipped worldwide.